4.3MM AIRTECH 1
The original AIR-THRUST pad is patented, and is accredited by World Squash Federation (WSF). Constructed of alternating vertical air cells, and composed of high quality genuine rubber with a durameter (hardness) requirement of 48+5. Provides excellent resilience, recovery and fatigue reduction properties as well as inhibits sound transmission.

10MM,16MM,19MM AIRTECH II, III, IV
The ideal pad size for both panel and sleeper system applications. Constructed of alternating vertical air cells, 56mm wide x 75mm long and either 10mm, 16mm or 19mm thick with stapling lips on each end. Composed of high quality rubber with superb load deflection which increases with pad thickness allowing selection of the size most suitable to the application. Will provide long term stability and reliability.

19mm AIRFLEX,PROFLEX
This unique round tapered pad provides instant an response to any dynamic activity on the surface floor as the air that's compressed within each cell gives immediate return to the system thereby lessening chances of athletic related injuries.

"AIR-THRUST" Pneumatic Natural Rubber Pads

Air-Thrust has undergone extensive testing in the following areas.

• Area & Point Resilience
  
• Standard Deflection
  
• Energy Loss
  
• Acoustics
  
• Life of Pad Mounts
  
• Ball Bounce
  

"AIR-THRUST" Pneumatic Flooring System which is widely used for indoor sports activities such as :

The company is proud to say that our products in this division have been widely recognized and endorsed by many sports organizations, both locally and internationally. They include :-

~ World Squash Federation (WSF)
~ Australia Amateur Basketball Association
~ Squash Rackets Association of Malaysia (SRAM)
~ Badminton Association of Malaysia (BAM)
~ Malaysia Netball Association (MNA)
~ Federal- Territory Sepak Takraw Association
~ Persatuan Bola Keranjang Malaysia (MABA)

The "Air-Thrust" pads can be installed under a panel system of plywood base or the cushioned batten system of random length tongue and groove strip flooring over the battens to cater to different loading requirements and sports activities.

Comprises of a 150um polyethylene vapour barrier over a screeded sub-floor over which is installed 2 layers of 12mm thick WBP plywood powernailed together. Air-Thrust pads are stapied to the underside of the first layer plywood at specified intervals. Timber in either parquentry or strip form is used as surface finish, glued and/or secret nailed to the top plywood base.

Comprises of a 150um polyethylene vapour barrier laid over a screeded sub-floor over which the timber batten and tongue &groove strip is laid. Air-Thrust pads are stapled to the underside of the batten at specified intervals. 18mm thick tongue & groove strips are secret nailed at 45 angle at thetongue of each strip onto the batten.

Comprises of a 150um polyethylene vapour barrier laid over a screeded sub-floor over which the finish surface timber is laid over a 12mm thick WBP plywood supported by timber battens running at specified intervals underneath. The underside of the battens shall be stapled with Air-Thrust pads at specified intervals. The 12mm thick plywood backing are nailed into the battens creating a sub-floor backing over which the finished surface timber of either block parquetry or strip is laid.

The "AIR-THRUST" Pneumatic Flooring System have been used for many indoor sports activities in these projects :-

•  Squash Court Glass Wall
• Squash Court Wall Coating System